The European Physical Journal Applied Physics (EPJ AP)

Regular Article

Melting of nanoparticle-enhanced phase change material inside an enclosure heated by laminar heat transfer fluid flow

Radouane Elbahjaoui, Hamid El Qarnia and Mohammed El Ganaoui

Published online: 27 May 2016

DOI: 10.1051/epjap/2016150422

Regular Article

Local detection of defects in materials by thermal analysis – flash method

Ahmed Kabouri, Abdelhamid Khabbazi, Hussein Youlal and Malika Janati-Idressi

Published online: 27 May 2016

DOI: 10.1051/epjap/2016150409

Regular Article

Solid-state structures and properties of scandium hydride; hydrogen storage and switchable mirrors application

Khadidja Khodja, Youcef Bouhadda, Larbi Seddik and Kamel Benyelloul

Published online: 03 May 2016

DOI: 10.1051/epjap/2016150424

Regular Article

Thermofluid effect on energy storage in fluidized bed reactor

Nadjiba Mahfoudi, Mohammed El Ganaoui and Abdelhafid Moummi

Published online: 03 May 2016

DOI: 10.1051/epjap/2016150408

Regular Article

Three-dimensional fluid flow simulation into a rectangular channel with partitions using the lattice-Boltzmann method

Abdelkader Boutra, Karim Ragui, Rachid Bennacer and Youb K. Benkahla

Published online: 03 May 2016

DOI: 10.1051/epjap/2016150417

Regular Article

Optical properties of undoped and tin-doped nanostructured In₂O₃ thin films deposited by spray pyrolysis

Nabil Fellahi, Mohammed Addou, Amina Kachouane, Mohamed El Jouad and Zouhair Sofiani

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150383

Regular Article

Microscopical and mechanical evaluation of the durability of SiO₂ aggregates

Hassan El Bahraoui, Lahcen Khouchaf and Amor Ben Fraj

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150426

Regular Article

Thermal stability and structural study of the poly(3-hexyl thiophene)/HiPCO single walled carbon nanotubes (P3HT/SWCNT) nanocomposites

Anass Bakour, Mimouna Baitoul, Eric Faulques and Jany Wery-Venturini

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150410

Regular Article

Cold sprayed copper coating: numerical study of particle impact and coating characterization

Yamina Mebdoua, Yazid Fizi and Nadjet Bouhelal

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150316

Regular Article

Physical incorporation of particles in a porous media: a path to a smart wood

Azza Zerriaa, Mohammed El Ganaoui, Christine Gerardin, Abdel Tazibt and Slimane Gabsi

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150458

Regular Article

A batteryless temperature sensor based on high temperature sensitive material

Asma Bakkali, José Pelegri-Sebastia, Youssef Laghmich and Abdelouahid Lyhyaoui

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150376

Regular Article

Mechanical coupled vibrations in an individual double-walled carbon nanotube

Mourad Boutahir, Abdelhai Rahmani, Hassan Chadli and Abdelali Rahmani

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150329

Regular Article

Copper:molybdenum sub-oxide blend as transparent conductive electrode (TCE) indium free

Mehdi Hssein, Linda Cattin, Mustapha Morsli, Mohammed Addou and Jean-Christian Bernède

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150336

Regular Article

Improvement of pentathiophene/fullerene planar heterojunction photovoltaic cells by improving the organic films morphology through the anode buffer bilayer

Zouhair El Jouad, Linda Cattin, Francisco Martinez, Gloria Neculqueo, Guy Louarn, Mohammed Addou, Padmanabhan Predeep, Jayan Manuvel and Jean-Christian Bernède

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150335

Regular Article

Numerical study of the influence of ZnTe thickness on CdS/ZnTe solar cell performance

Othmane Skhouni, Ahmed El Manouni, Bernabe Mari and Hanif Ullah

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150365

Free Access

Editorial

Materials for energy harvesting, conversion and storage

R. Bennacer, M. El Ganaoui and J.M. Nunzi

Published online: 21 June 2016

DOI: 10.1051/epjap/2016160141

EPJ

The European Physical Journal - Applied Physics

Materials for Energy Harvesting, Conversion and Storage (ICOME 2015)

Melting of nanoparticle-enhanced phase change material inside an enclosure heated by laminar heat transfer fluid flow

Local detection of defects in materials by thermal analysis – flash method

Solid-state structures and properties of scandium hydride; hydrogen storage and switchable mirrors application

Thermofluid effect on energy storage in fluidized bed reactor

Three-dimensional fluid flow simulation into a rectangular channel with partitions using the lattice-Boltzmann method

Optical properties of undoped and tin-doped nanostructured In₂O₃ thin films deposited by spray pyrolysis

Microscopical and mechanical evaluation of the durability of SiO₂ aggregates

Thermal stability and structural study of the poly(3-hexyl thiophene)/HiPCO single walled carbon nanotubes (P3HT/SWCNT) nanocomposites

Cold sprayed copper coating: numerical study of particle impact and coating characterization

Physical incorporation of particles in a porous media: a path to a smart wood

A batteryless temperature sensor based on high temperature sensitive material

Mechanical coupled vibrations in an individual double-walled carbon nanotube

Copper:molybdenum sub-oxide blend as transparent conductive electrode (TCE) indium free

Improvement of pentathiophene/fullerene planar heterojunction photovoltaic cells by improving the organic films morphology through the anode buffer bilayer

Numerical study of the influence of ZnTe thickness on CdS/ZnTe solar cell performance

Materials for energy harvesting, conversion and storage

Conference announcements