Eur. Phys. J. AP 16, 195-208 (2001)
https://doi.org/10.1051/epjap:2001210

Fuzzy logic controllers for electrotechnical devices - On-site tuning approach

¹ Institut National Polytechnique de Toulouse, École Nationale Supérieure d'Électrotechnique, d'Électronique, d'Informatique et d'Hydraulique de Toulouse, Laboratoire d'Électrotechnique et d'Électronique Industrielle (UMR CNRS n° 5828), 2 rue Camichel, BP 7122, 31071 Toulouse Cedex 7, France
² Institut National Polytechnique de Toulouse, École Nationale Supérieure d'Électrotechnique, d'Électronique, d'Informatique et d'Hydraulique de Toulouse, Laboratoire d'Électronique, Électrotechnique et Systèmes, Unité mixte de recherche UTBM & UFC associée à l'INRETS LRE T31 L2ES - IGE Parc Technologique, 2 avenue Jean Moulin, 90000 Belfort, France

Corresponding author: faucher@leei.enseeiht.fr

Received: 13 March 2000
Revised: 8 March 2001
Accepted: 20 July 2001
Published online: 15 December 2001

Abstract

Fuzzy logic offers nowadays an interesting alternative to the designers of non linear control laws for electrical or electromechanical systems. However, due to the huge number of tuning parameters, this kind of control is only used in a few industrial applications. This paper proposes a new, very simple, on-site tuning strategy for a PID-like fuzzy logic controller. Thanks to the experimental designs methodology, we will propose sets of optimized pre-established settings for this kind of fuzzy controllers. The proposed parameters are only depending on one on-site open-loop identification test. In this way, this on-site tuning methodology has to be compared to the Ziegler-Nichols one's for conventional controllers. Experimental results (on a permanent magnets synchronous motor and on a DC/DC converter) will underline all the efficiency of this tuning methodology. Finally, the field of validity of the proposed pre-established settings will be given.