Eur. Phys. J. Appl. Phys. 49, 13109 (2010)
https://doi.org/10.1051/epjap/2009197

Instrumentation for a plasma needle applied to E. coli bacteria elimination

¹ Instituto Nacional de Investigaciones Nucleares, Laboratorio de Física de Plasmas, AP 18-1027, 11801 México D.F., Mexico
² Instituto Tecnológico de Toluca, AP 890, Toluca, Estado de México, Mexico
³ Universidad de Guadalajara, CUCEI, Departamento de Farmacobiología, Blvd. Marcelino Barragán No. 1421 esq. Calz. Olímpica, Guadalajara, Mexico

Corresponding author: rosendo.eguiluz@inin.gob.mx

Received: 19 June 2009
Accepted: 6 November 2009
Published online: 26 November 2009

Abstract

Microplasmas are nowadays a powerful tool with multiple practical applications. The performance of a specific instrumentation for a plasma needle capable of producing non-thermal plasmas and a DBD reactor able to produce atmospheric pressure plasmas, both of them designed and already constructed, is reported. These devices operate at 13.56 MHz and are driven by a specifically built radio frequency (RF) resonant converter. The reactors, which operate at atmospheric pressure in a He-air gas mixture at a 1.5 SLPM flow, have been successfully applied to eliminate E. coli bacteria. In the needle case, bacterial samples were submitted typically to a 500 V peak voltage plasma discharge for 120 s. In the DBD treatment, the samples were processed with typical 750 V peak voltage plasma discharges for 80 s. The sample pH was used as a criterion to measure the effectiveness of the plasma treatment, in such a way that the return to the basal pH value after the treatment can be assumed as the validation of the complete bacterial elimination.