The European Physical Journal Applied Physics (EPJ AP)

Melting of nanoparticle-enhanced phase change material inside an enclosure heated by laminar heat transfer fluid flow 24616

Radouane Elbahjaoui, Hamid El Qarnia and Mohammed El Ganaoui

Published online: 27 May 2016

DOI: 10.1051/epjap/2016150422

Local detection of defects in materials by thermal analysis – flash method 24615

Ahmed Kabouri, Abdelhamid Khabbazi, Hussein Youlal and Malika Janati-Idressi

Published online: 27 May 2016

DOI: 10.1051/epjap/2016150409

Solid-state structures and properties of scandium hydride; hydrogen storage and switchable mirrors application 24614

Khadidja Khodja, Youcef Bouhadda, Larbi Seddik and Kamel Benyelloul

Published online: 03 May 2016

DOI: 10.1051/epjap/2016150424

Thermofluid effect on energy storage in fluidized bed reactor 24613

Nadjiba Mahfoudi, Mohammed El Ganaoui and Abdelhafid Moummi

Published online: 03 May 2016

DOI: 10.1051/epjap/2016150408

Three-dimensional fluid flow simulation into a rectangular channel with partitions using the lattice-Boltzmann method 24612

Abdelkader Boutra, Karim Ragui, Rachid Bennacer and Youb K. Benkahla

Published online: 03 May 2016

DOI: 10.1051/epjap/2016150417

Optical properties of undoped and tin-doped nanostructured In₂O₃ thin films deposited by spray pyrolysis 24611

Nabil Fellahi, Mohammed Addou, Amina Kachouane, Mohamed El Jouad and Zouhair Sofiani

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150383

Microscopical and mechanical evaluation of the durability of SiO₂ aggregates 24610

Hassan El Bahraoui, Lahcen Khouchaf and Amor Ben Fraj

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150426

Thermal stability and structural study of the poly(3-hexyl thiophene)/HiPCO single walled carbon nanotubes (P3HT/SWCNT) nanocomposites 24609

Anass Bakour, Mimouna Baitoul, Eric Faulques and Jany Wery-Venturini

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150410

Cold sprayed copper coating: numerical study of particle impact and coating characterization 24608

Yamina Mebdoua, Yazid Fizi and Nadjet Bouhelal

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150316

Physical incorporation of particles in a porous media: a path to a smart wood 24607

Azza Zerriaa, Mohammed El Ganaoui, Christine Gerardin, Abdel Tazibt and Slimane Gabsi

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150458

A batteryless temperature sensor based on high temperature sensitive material 24606

Asma Bakkali, José Pelegri-Sebastia, Youssef Laghmich and Abdelouahid Lyhyaoui

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150376

Mechanical coupled vibrations in an individual double-walled carbon nanotube 24605

Mourad Boutahir, Abdelhai Rahmani, Hassan Chadli and Abdelali Rahmani

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150329

Copper:molybdenum sub-oxide blend as transparent conductive electrode (TCE) indium free 24604

Mehdi Hssein, Linda Cattin, Mustapha Morsli, Mohammed Addou and Jean-Christian Bernède

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150336

Improvement of pentathiophene/fullerene planar heterojunction photovoltaic cells by improving the organic films morphology through the anode buffer bilayer 24603

Zouhair El Jouad, Linda Cattin, Francisco Martinez, Gloria Neculqueo, Guy Louarn, Mohammed Addou, Padmanabhan Predeep, Jayan Manuvel and Jean-Christian Bernède

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150335

Numerical study of the influence of ZnTe thickness on CdS/ZnTe solar cell performance 24602

Othmane Skhouni, Ahmed El Manouni, Bernabe Mari and Hanif Ullah

Published online: 03 May 2016

DOI: 10.1051/epjap/2015150365

Free Access

Editorial

Materials for energy harvesting, conversion and storage 24601

R. Bennacer, M. El Ganaoui and J.M. Nunzi

Published online: 21 June 2016

DOI: 10.1051/epjap/2016160141

EPJ

The European Physical Journal Applied Physics

Volume 74 / No 2 (May 2016)

Materials for Energy Harvesting, Conversion and Storage (ICOME 2015)

Materials for Energy Harvesting, Conversion and Storage (ICOME 2015)

Melting of nanoparticle-enhanced phase change material inside an enclosure heated by laminar heat transfer fluid flow 24616

Local detection of defects in materials by thermal analysis – flash method 24615

Solid-state structures and properties of scandium hydride; hydrogen storage and switchable mirrors application 24614

Thermofluid effect on energy storage in fluidized bed reactor 24613

Three-dimensional fluid flow simulation into a rectangular channel with partitions using the lattice-Boltzmann method 24612

Optical properties of undoped and tin-doped nanostructured In₂O₃ thin films deposited by spray pyrolysis 24611

Microscopical and mechanical evaluation of the durability of SiO₂ aggregates 24610

Thermal stability and structural study of the poly(3-hexyl thiophene)/HiPCO single walled carbon nanotubes (P3HT/SWCNT) nanocomposites 24609

Cold sprayed copper coating: numerical study of particle impact and coating characterization 24608

Physical incorporation of particles in a porous media: a path to a smart wood 24607

A batteryless temperature sensor based on high temperature sensitive material 24606

Mechanical coupled vibrations in an individual double-walled carbon nanotube 24605

Copper:molybdenum sub-oxide blend as transparent conductive electrode (TCE) indium free 24604

Improvement of pentathiophene/fullerene planar heterojunction photovoltaic cells by improving the organic films morphology through the anode buffer bilayer 24603

Numerical study of the influence of ZnTe thickness on CdS/ZnTe solar cell performance 24602

Materials for energy harvesting, conversion and storage 24601

Conference announcements

EPJ

The European Physical Journal Applied Physics

Volume 74 / No 2 (May 2016)

Materials for Energy Harvesting, Conversion and Storage (ICOME 2015)

Materials for Energy Harvesting, Conversion and Storage (ICOME 2015)

Melting of nanoparticle-enhanced phase change material inside an enclosure heated by laminar heat transfer fluid flow 24616

Local detection of defects in materials by thermal analysis – flash method 24615

Solid-state structures and properties of scandium hydride; hydrogen storage and switchable mirrors application 24614

Thermofluid effect on energy storage in fluidized bed reactor 24613

Three-dimensional fluid flow simulation into a rectangular channel with partitions using the lattice-Boltzmann method 24612

Optical properties of undoped and tin-doped nanostructured In2O3 thin films deposited by spray pyrolysis 24611

Microscopical and mechanical evaluation of the durability of SiO2 aggregates 24610

Thermal stability and structural study of the poly(3-hexyl thiophene)/HiPCO single walled carbon nanotubes (P3HT/SWCNT) nanocomposites 24609

Cold sprayed copper coating: numerical study of particle impact and coating characterization 24608

Physical incorporation of particles in a porous media: a path to a smart wood 24607

A batteryless temperature sensor based on high temperature sensitive material 24606

Mechanical coupled vibrations in an individual double-walled carbon nanotube 24605

Copper:molybdenum sub-oxide blend as transparent conductive electrode (TCE) indium free 24604

Improvement of pentathiophene/fullerene planar heterojunction photovoltaic cells by improving the organic films morphology through the anode buffer bilayer 24603

Numerical study of the influence of ZnTe thickness on CdS/ZnTe solar cell performance 24602

Materials for energy harvesting, conversion and storage 24601

Share

Conference announcements

Optical properties of undoped and tin-doped nanostructured In₂O₃ thin films deposited by spray pyrolysis 24611

Microscopical and mechanical evaluation of the durability of SiO₂ aggregates 24610