Eur. Phys. J. Appl. Phys. 95, 20901 (2021)
https://doi.org/10.1051/epjap/2021200308

Regular Article

Thermo-mechanical energy harvesting and storage analysis in 0.6BZT-0.4BCT ceramics

¹ Department of Mechanical Engineering, Indian Institute of Technology Indore, Indore 453552, Madhya Pradesh, India
² Department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur, Jaipur 302017, Rajasthan, India
³ Department of Electrical and Electronics Engineering, National Institute of Technology Surathkal, Karnataka 575025, India

^* e-mail: spatel@iiti.ac.in

Received: 30 September 2020
Received in final form: 19 May 2021
Accepted: 5 July 2021
Published online: 23 July 2021

Abstract

Present work shows waste energy (thermal/mechanical) harvesting and storage capacity in bulk lead-free ferroelectric 0.6Ba(Zr_0.2Ti_0.8)O₃–0.4(Ba_0.7Ca_0.3)TiO₃ (0.6BZT-0.4BCT) ceramics. The thermal energy harvesting is obtained by employing the Olsen cycle under different stress biasing, whereas mechanical energy harvesting calculated using the thermo-mechanical cycle at various temperature biasing. To estimate the energy harvesting polarization-electric field loops were measured as a function of stress and temperatures. The maximum thermal energy harvesting is obtained equal to 158 kJ/m³ when the Olsen cycle operated as 25–81 °C (at contact stress of 5 MPa) and 0.25–2 kV/mm. On the other hand, maximum mechanical energy harvesting is calculated as 158 kJ/m³ when the cycle operated as 5–160 MPa (at a constant temperature of 25 °C) and 0.25–2 kV/mm. It is found that the stress and temperature biasing are not beneficial for thermal and mechanical energy harvesting. Further, a hybrid cycle, where both stress and temperature are varied, is also studied to obtain enhanced energy harvesting. The improved energy conversion potential is equal to 221 kJ/m³ when the cycle operated as 25–81 °C, 5–160 MPa and 0.25–2 kV/mm. The energy storage density varies from 43 to 66 kJ/m³ (increase in temperature: 25–81 °C) and 43–80 kJ/m³ (increase in stress: 5–160 MPa). Also, the pre-stress can be easily implemented on the materials, which improves energy storage density almost 100% by stress induced domain switching. The results show that stress confinement can be used to enhance energy storage effectively.