The European Physical Journal Applied Physics

Synthesis and properties of pyrrhotite ash based cubical α-Fe₂O₃ nanoparticles 90

Pyroelectric generators to harvest energy from disc brake pads for wireless sensors in electric vehicles 89

PVDF–HFP/PZT nanocomposite thin films: preparation, structure and piezoelectric properties 88

Energy harvesting using a dynamic weighing system based on piezoelectric materials 83

Simulation and optimization of a RO/EV pilot reverse osmosis desalination plant powered by PV solar energy: the application to brackish water at low concentration 82

Recent advances in bulk-heterojunction solar cells: a review 81

Effect of the RF-power and annealing on the structural, optical, morphological and electrical properties of RF-sputtered V₂O₅ thin films 79

Performance of a dual piezoceramic cantilever for low frequency energy harvesting applications: modeling and experiment verification 78

On the meniscus shape and marangoni flow in capillary tubes with noncircular cross-section shapes 77

Study of the corrosion inhibition of C38 steel in a 1M HCl medium by the ethanolic extract of Rumex Nervosus Vahl leaves 76

Validation using the in vivo experiment of the 3D model of the human ear using the equivalent mechanical impedance of the Mass-Spring-Damper System 74

Hybrid nanofluids multi performance optimizations for the cooling system coupling with hybrid photovoltaic thermal collectors 70

Effect of temperature on corrosion inhibition by ethanolic extract of Eriobotrya Japonica seeds in chloride medium 1M 67

On the effect of concentration and wettability on polymer drops impact, dynamics and energy dissipation 66

Improving dielectric properties of composites thin films with polylactic acid and PZT microparticles induced by interfacial polarization 64

Modeling of nonlinear and hysteretic behaviors in the ferroelectric materials under strong electrical and mechanical driving levels 63

Angular distribution of particles sputtered from the vanadium target by 5 keV Kr ions: simulation study 62

Evaluation of electrical conductivity of Fe-doped forsterite ceramics synthetized by sol–gel method 61

Study of electrical properties of Al/Si₃N₄/n-GaAs MIS capacitors deposited at low and high frequency PECVD 60

Comparative study of solar tracking and fixed-tilt photovoltaic modules in Morocco 51

One-step synthesis and characterisation of crystalline nano-calcite from phosphogysum by precipitation method 50

Characterization of earplugs based on porous polyurethane (PU) and polyvinyl-chloride (PVC) polymers for human ear protection 48

Effect of annealing time on different properties of the next generation Cu₂Ni_0.50Co_0.50SnS₄Thin films 47

Fabrication and characterization of ITO/ZnO/anthraquinone solid dye-sensitized solar cells 45

The electrode model of corona plasma discharge theory for current–voltage characteristics case in air 22

Structural and optical properties of silver-indium and silver-aluminium nanoalloys: stability against oxidation 59

Out-of-equilibrium supported Pt-Co core-shell nanoparticles stabilized by kinetic trapping at room temperature 56

The effects of Pt doping on the optical properties of Au₂₀ 46

Chemical and magnetic order in mass-selected large FeRh nanomagnets embedded in a carbon matrix 32

Growth of out-of-equilibrium PtPd nanoalloys 31

The local atomic pressures in 79 atom Pd-Ag-Pt truncated octahedron structure 30

Growth of size-matched nanoalloys – a comparison of AuAg and PtPd 28

Self-organization mechanisms in a Fe-Au film: from isolated core-shell to multicore nanoparticles 27

Central vacancy creation in icosahedral nanoparticles induced by the displacement of large impurities 18

Structural relaxation in Ag-Ni nanoparticles: atomistic modeling away from equilibrium 16

Gaussian mixture model for the unsupervised classification of AgCu nanoalloys based on the common neighbor analysis 11

2D hybrid magneto-thermal model for PM induction heating device with rotating movement 68

Comparative study of permanent magnet synchronous machine vs salient pole synchronous machine in high temperature application 52

Research on a permanent magnet assisted synchronous reluctance machine with hybrid excitation 43

Shaping the topology of a single phase BLDC motor for reduced cogging torque and improved performance 36

Research on ac copper losses in permanent magnet electrical machines with hairpin windings for automotive applications 34

Review of EELS over the last 50 years by Christian Colliex E1

From early to present and future achievements of EELS in the TEM 38

Micro- and nano-sized materials for solar evaporators: a review 84